Cowboy
latch:
The Real Cowboy Latch
was invented by Nebraska cowboys to make riding through gates on
horseback a lot easier. It is as easy to use from horseback as it
is on foot. It is safe, strong, easy to install, and will last a
lifetime.
Try one and you will
never use anything else.
- Safe:
smooth curve of latch mechanism means that horses and cows won’t
get poked in the side if they hit the end of the gate.
- Strong:
constructed of 5/8” cold roll steel rod.
- Simple:
simple to use just pull the chain to open, let go and gravity
closes the latch. No springs to wear out and only one moving part.
- Forgiving:
with the real cowboy latch you don’t have to have the gate
lined up perfectly with the latch post as you do with other latches,
in fact you don’t even have to be close!
The design of the cowboy
latch means that you have nearly 6 inches of tolerance, yes 6 inches.
So if your gate sags, the latch will still work just like new!
Pre-hung
gates:
Pre-hung gates are perfect
for portable corrals or for barns.
Easy to install in permanent locations too! Just chain or bolt it
to a post, no need to spend time hanging a gate.
Cowboy
latch is standard on all Plus One
pre-hung gates.
Frame is made of 2”
square tube-strong and rigid
Sizes available:
- 4’ gate in
6’ frame
- 6’ gate in 8’
frame
- 8’gate in 10’
frame
- 10’gate in 12’
frame
These gates are 8’6”
tall
Loops on the end are for connecting to portable panels.
Heavy
duty 6 and 7 bar
These gates are the
best in the world, and they are affordable too!
6 bar gates are 4’ tall, 7 bar gates are 4’9” tall.
Gates measure 4.5” shorter than advertised size.
All notched joints. A notched joint is x% stronger than a pinched
joint.
1.9” 14 gauge structural tubing for bars and uprights. 1.9”
10 gauge tube for the end that has the hinges.
Hinges are large diameter, thick, sleeves. They turn easier, last
longer, and are much stronger than other types of hinges.
You can use the ultra heavy duty ‘all thread’ hinges for
wood posts, or you can use the special weld on hinges for steel
posts.
Chain latch is made of 1/4” plate and fits a 5/16” chain.
It is strong, sure locking and easy to use. It is standard on all
gates, as is 3’ of 5/16” chain.
Available in sizes from less than 4’ long up to 20’. Longer
gates are available, though we recommend using two shorter gates
or using a bi-folding gate in holes longer than 20’.
Custom sizes available, check out the price sheet for prices and
call for details.
|
